Avaya Communication Manager Administrator's Manual page 993

AUTHORIZATION CODE PARAMETERS
Attendant Time Out Flag
If this field is not enabled, the caller receives Intercept tone. This flag affects only remote users
or incoming calls over trunks requiring an authorization code. This field only appears if
Authorization Codes Enabled is y.
Valid entries
y/n
Authorization Code Cancellation Symbol
Enter the symbol a caller must dial to cancel the 10-second wait period during which the user
can enter an authorization code. This field only appears when Authorization Code is y.
Valid entries
#
1
Authorization Code Length
This field only appears and must be completed if Authorization Codes Enabled is y. This is
the number of digits that must be assigned to the Authorization Code (AC) field on the
Authorization Code screen.
!
SECURITY ALERT:
You enhance your system's security by using the maximum length for your
SECURITY ALERT:
authorization code.
Valid entries
4 to 13 digits
Usage
Enter y if a call is to be routed to the attendant if the caller does not dial an
authorization code within 10 seconds or dials an invalid authorization
code.
Usage
Enter the cancellation code # if the main and tandem servers/switches are
both of the same type.
Enter the cancellation code 1 if an Avaya System 85 or DIMENSION PBX
switch is part of the complex/network.
Usage
Enter a number that defines the number of digits (length) in the
Authorization Code field.
Feature-Related System Parameters
Issue 2.1 May 2006 993