Avaya Communication Manager Administrator's Manual page 404

Setting Up Telecommuting
Before you start
You can also set up telecommuting with an IP (internet protocol) telephone or IP Softphone. For
example, see
For DCP/ISDN telecommuting, ensure you have the following equipment:
Call Classifier — Detector
●
1264-TMx software
●
Avaya Communication Manager extender — switching module or standalone rack mount
●
(Digital Communications Protocol (DCP) or Integrated Services Digital Network (ISDN))
For more information about this equipment, see the Hardware Description and Reference
for Avaya Communication Manager, 555-245-207.
Verify the following fields on the
Cvg Of Calls Redirected Off-Net
●
Extended Cvg/Fwd Admin
●
Personal Station Access
●
Terminal Translation Initialization (TTI)
●
If neither Avaya Communication Manager extender nor the System Parameters Customer
Options fields are configured, contact your Avaya technical support representative.
Verify the telecommuting access extension is a direct inward dialing (DID) or a central office
(CO) trunk destination for off-premises features to work.
Configure TTI for personal station access (PSA). For information about configuring TTI, see
Setting up Personal Station Access
Configure Security Violation Notification for Station Security Codes. For information about
Security Violation Notification, see
Instructions
In our example, we set up the telecommuting extension and enable coverage of calls redirected
off-net.
To configure Avaya Communication Manager for telecommuting:
1. Type change telecommuting-access. Press Enter.
The Telecommuting Access
404 Administrator Guide for Avaya Communication Manager
Adding an IP Softphone
System-Parameters Customer-Options
Setting up Security Violations Notification
screen appears.
on page 102 for more information.
on page 405.
screen are set to y.
on page 453.