Avaya Communication Manager Administrator's Manual page 904

Screen Reference
MIM Support
Used with 7500 Data Modules.
Valid entries
y/n
SPID
Used with 7500, World Class BRI, and NI-BRI Data Modules. Appears only if the Endpt Init
field is y. The Service Profile Identifier (SPID) is a variable parameter of up to 10 digits. The
SPID must be different for all terminals on the ISDN-BRI and from the Service SPID. The SPID
should always be assigned. If the SPID is not assigned for the first ISDN-BRI on a port, any
other ISDN-BRI assignment to that port is blocked.
Valid entries
0 to 9999999999
TEI
Used with 7500, World Class BRI, and NI-BRI Data Modules. Appears only if the Fixed TEI field
is y.
Valid entries
0 to 63
XID
(Exchange identification) Used with 7500, World Class BRI, and NI-BRI Data Modules. Used to
identify layer 2 XID testing capability.
Valid entries
y/n
904 Administrator Guide for Avaya Communication Manager
Usage
Used to support two types of capabilities: MIM endpoint initialization
capability (SPID support), and other Maintenance/Management
capability.
Usage
Assign a Service Profile Identifier (SPID) for this data module.
Usage
Enter a 1 to 2-digit number.
Usage
Avaya recommends setting to n.