Honda Accord 2008 Manual page 453

07/11/02 09:05:01 61TA0000_110_0134
PGM-FI System
DTC Troubleshooting (cont'd)
11. Turn the ignition switch to LOCK (0).
12. Jump the SCS line with the HDS.
13. Disconnect ECM/PCM connector C (49P).
14. Check for continuity between ECM/PCM connector
terminal C31 and body ground.
＊０４
Is there continuity?
YES
PCM (C31) and CMP sensor B, then go to step 18.
NO −
11-134
ECM/PCM CONNECTOR C (49P)
CMPB (GRN)
Terminal side of female terminals
− Repair short in the wire between the ECM/
Go to step 15.
15. Check for continuity between CMP sensor B 3P
connector terminal No. 1 and ECM/PCM connector
terminal C31.
CMP SENSOR B 3P CONNECTOR
CMPB (GRN)
Wire side of female terminals
ECM/PCM CONNECTOR C (49P)
CMPB (GRN)
Terminal side of female terminals
Is there continuity?
YES − Go to step 23.
NO − Repair open in the wire between the ECM/
PCM (C31) and CMP sensor B, then go to step 18.
＊０５