Chery T21 2014 Service Manual page 282

06 - SQR484F ENGINE MANAGEMENT SYSTEM
2
Check camshaft position sensor signal waveform
a. Turn ignition switch to ON, start the engine and observe the signal waveform of camshaft position sensor
with an oscilloscope.
06
Go to step 10
OK
3
Check camshaft position sensor connector
a. Turn ignition switch to LOCK.
b. Disconnect camshaft position sensor connectors E-020 and E-015.
c. Check camshaft position sensor connector.
Repair or replace camshaft position
NG
sensor connector
118
06–
Oscilloscope
Normal Waveform
2.00 V
10.0 ms
RT21060230
Chery Automobile Co., Ltd.
NG
OK