Avaya Definity SI Maintenance Manual page 285

change system-parameters maintenance
Output
The following output example shows a display of the change
system-parameters maintenance command.
change system-parameters maintenance
MAINTENANCE-RELATED SYSTEM PARAMETERS
OPERATIONS SUPPORT PARAMETERS
Product Identification: 1000000000
First OSS Endpoint: 5551212
Second OSS Endpoint: 5551213
Alarm Origination to OSS Numbers: both
Cleared Alarm Notification? y
Restart Notification? y
Test Remote Access Port? n
CPE Alarm Activation Level: none
Packet Bus Activated? n
Customer Access to INADS Port? n
Repeat Dial Interval (mins): 7
SCHEDULED MAINTENANCE
Start Time: 22: 00
Daily Maintenance: daily
Control Channel Interchange: no
SPE Interchange: no
Field descriptions (page 1)
Operations Support Parameters
Product
Identification
First OSS
Telephone
Number
Abbrev Alarm
Report
Second OSS
Telephone
Number
Abbrev Alarm
Report
555-233-123
System Clocks Interchange: no
EXP-LINK Interchange: no
Identifies switch to an Operations Support System (OSS):
10-digit number starting with 1.
Switch reports alarms first to the First OSS telephone number
(for example, INADS or Trouble Tracker). The number must be
obtained from the National Customer Support Center (NCSC) or
the TSC. (# and * are not allowed in the telephone number.)
Enables the Abbreviated Alarm Report feature for the first OSS.
(y)
The switch reports alarms secondly to the second OSS
telephone number. For example, INADS or DEFINITY SNMP.
The number must be obtained from the National Customer
Support Center (NCSC) or the TSC. (# and * are not allowed in
the telephone number.)
Enables the Abbreviated Alarm Report feature for the second
OSS. (n)
Page
Abbrev Alarm Report? y
Abbrev Alarm Report? n
Suspension Threshold: 5_
Stop Time: 04: 00
Save Translation: daily
Issue 4 May 2002
1 of 3
8-35