Change Ip-Network-Region - Avaya Definity SI Maintenance Manual

Maintenance Commands and Trouble-Clearing Aids
Field descriptions
Source Board
Location
Firmware Image
File Name
Target Board Code
Suffix
Firmware Vintage
Schedule Download?
Remove Image File
After Successful
Download?
Start Date/Time
Stop Date/Time
Target Location

change ip-network-region

change ip-network-region x
"x" is between 1 to 250 for r and 80 for si/csi/d.
Fields are automatically filled in for the same region with the codec selected on
the first page of this screen. For example, for change ip-network-region 1, the
fields in row 1, column 1 are populated with the codec selected on the first page. If
ip-network-region 9 is administered with connectivity with ip-network-region 11
first and then ip-network-region 11 appears, the fields are automatically populated
to show connectivity with ip-network-region 9.
8-30 Issue 4 May 2002
The C-LAN board location (ppcss) where the firmware image resides.
Enter the firmware image file name to download. Firmware image file
names can be from 1 to 40 alphanumeric characters (i.e., printable
characters, including blanks).
This is the TN-code of the target board to be downloaded.
This is the suffix of the target board to be downloaded.
This is only displayed when a download is in progress or after a
download.
This field indicates whether the download will take place immediately or
at some future time. If "n" is entered, the download will commence when
the form is successfully submitted. If "y" is entered, the Start Date/Time
and Stop Date/Time fields are displayed to schedule the download.
This field indicates whether the firmware image file on the source board
will be automatically removed following the successful download of all
specified target boards. If set to "y" and all boards were successfully
downloaded, the image file will be removed and the file system on the
source board will be disabled.
This field only appears if the Schedule Download field is set to "y". The
Date portion of the field will be of the format mm/dd/yyyy (mm=2 digits for
the month, dd=2 digits for the day and yyyy = 4 digits for the year). The
Time portion of the field will be of the format hh:mm (hh=2 digits for the
hour and mm = 2 digits for the minutes).
This field only appears if the Schedule Download field is set to "y". The
Date portion of the field will be of the format mm/dd/yyyy (mm=2 digits for
the month, dd=2 digits for the day and yyyy = 4 digits for the year). The
Time portion of the field will be of the format hh:mm (hh=2 digits for the
hour and mm = 2 digits for the minutes). If this field is left blank, the
download will continue until completion.
These fields contain the target board locations (ppcss) of the boards that
will receive the download file image.
555-233-123