Avaya Definity SI Maintenance Manual page 264

Table of Contents

Advertisement

Maintenance Commands and Trouble-Clearing Aids
For information on PMS, see the description of the
Action/
Object
Qualifier
busyout
pms-link
Feature Interactions
Maintenance of a particular component on a link sometimes interferes with the
maintenance of the link itself. For example, maintenance can put a link
component in a busy state causing link set-up to fail. Frequent attempts at
re-setup of a link may delay the recovery of a faulty component, due to the
maintenance test of a component only taking place when the component is idle.
Therefore, disable the attempted re-setup of a link with the busyout command and
the link remains intact. If the link is already down, the busyout command stops
periodic re-setup attempts on the link.
Output
The following example is a display of the busyout pms-link command.
busyout pms-link
Port
Maintenance Name
PMS-LINK
Command Successfully Completed
Field descriptions
Port
Maintenance Name
Alt. Name
Result
Error Code
8-14
Issue 4 May 2002
Qualifier Description
Example:
busyout pms-link
COMMAND RESULTS
Alt. Name
Result
PASS
Always blank
Name of maintenance object:
Not applicable.
Test result: Pass, Abort, Fail
Numeric code explaining why the release failed or aborted.
Refer to the detailed list of codes by test number for each MO.
''status pms-link''
Logins
Defaults
init
none
inads
craft
SPE A
Error Code
PMS-LINK
command.
Feature
Interactions
See below
555-233-123

Advertisement

Table of Contents
loading

Table of Contents