Change Synchronization - Avaya Definity SI Maintenance Manual

Maintenance Commands and Trouble-Clearing Aids

change synchronization

Each system contains a hierarchy of sources used for timing synchronization.
DS1 inputs to the external stratum 3 clock affect stratum 3 synchronization
hierarchy. Primary and secondary fields reflect Stratum 4 synchronization. If all
fields are blank, the tone clock board within each PN provides timing for that PN.
Action/Object Qualifier
change
synchronization
Output
The following example shows the output for the change synchronization
command. "4" was entered in the stratum field.
change synchronization
SYNCHRONIZATION PLAN
SYNCHRONIZATION SOURCE (circuit pack location)
Stratum: 4
Primary: _____
Location Name
NOTE: DS1 and BRI trunk source will result in stratum 4, type II synchronization
The following output example shows the output for the change synchronization
command. "3" was entered in the stratum field.
8-32 Issue 4 May 2002
Qualifier
Description
Examples:
change
synchronization
change synch
Secondary: _____
Slip Location
Logins Defaults
init none
inads
craft
cust
rcust
bcms
Page 1 of 1
Name Slip
Feature
Interactions
DS1 interface,
BRI trunk, or
UDS1 board
selected as a
primary or
secondary synch
source cannot be
removed on the
DS1 circuit pack
administration
form or the
regular circuit
pack
administration
form.
555-233-123