CORROSION PROTECTION - ALL MODELS
Bravo Two Sterndrive Units
1. Use a 1/2 in. standard socket to loosen screw and remove anodic plate.
2. Scrape anodic plate mounting surface down to bare metal to ensure continuity.
3. Install anodic plate. Torque screw to 30 lb-ft (41 Nm).
Bravo Three Sterndrive Units
1. Remove plastic cap to gain access to the anode attaching bolt.
2. Scrape the mounting surface on gear housing down to bare metal to ensure continuity.
3. Install new anode. Torque to 23 lb-ft (32 Nm).
4. Reinstall plastic cap.
Page 7A-8
a -
Screw
b -
Anodic plate
a -
Anodic Plate
a -
Plastic Cap (Removed)
b -
Bolt
a
b
a
a
b
SERVICE MANUAL NUMBER 28
50323
76831
76832
90-863160 MAY 2000