Power Steering Pump Installation - Mercury BRAVO Service Manual

POWER STEERING
Installation
IMPORTANT: Be careful to not cross-thread or overtighten hose fittings.
1. Place the power steering pump on the bracket and install the screws and nut. Torque
a
2. Be certain a new high pressure hose O-ring is present. Install threaded fitting in back
3. Install mounting hardware and fasteners to retain pump to bracket. (Refer to "Exploded
4. Install drive belt and adjust tension. Refer to "Pump Drive Belt Adjustment" as previously
5. Fill and air bleed system. Refer to SECTION 1B - "Maintenance."
Page 6A-32
to 30 lb-ft (41 Nm).
Power Steering Pump Typical Location
a - Nut
b - Bolts
of pump assembly. Tighten fitting securely. Connect low pressure hose on back of pump.
Tighten hose clamp securely.
Power Steering Pump Typical Location
a - Return Hose
b - High Pressure Hose
View" for specific details on your engine.)
outlined.
b
75798
a
SERVICE MANUAL NUMBER 28
a
b
90-863160 MAY 2000
75228
75228