Mercury BRAVO Service Manual page 321

SERVICE MANUAL NUMBER 28
6. Reinstall trim limit switch as follows:
7. Secure the trim limit switch harness to the water hose with the plastic clip.
8. Reconnect trim position sender wires to engine harness and the trim limit leads to trim
9. Reinstall battery cables.
90-863160 MAY 2000
a. Place sterndrive unit in full DOWN/IN position.
b. Turn center rotor of trim position sender to align index mark with index mark on
sender body.
a - Index Marks
c. Install trim limit switch and secure with attaching hardware.
a - Attaching Hardware
b
a - Plastic Clip
b - Trim Limit Switch Harness
c - Water Hose
pump harness.
SERVICE PROCEDURES REQUIRING MINOR DISASSEMBLY
a
a
c
a
71218
71221
71184
Page 4A-15