SERVICE MANUAL NUMBER 28
Crimp Clamp Tool
1. Weld a 3/4 in. nut to the jaws of a pair of pliers.
2. Saw the nut in half without damaging the pliers.
3. Clamp the jaws of the pliers in a vice so that the two halves of the nut are pressed firmly together.
4. Use a 1/2 in. drill bit to drill out the threads of the nut.
5. Remove the pliers from the clamp and bevel the edges of the nut as indicated.
90-863160 MAY 2000
b
a
d
b
a -
Bevel Edges
b -
3/4 in. Nut
c -
Pliers
d -
Nut (Cut In Half)
SERVICE PROCEDURES REQUIRING MINOR DISASSEMBLY
a
d
a
c
74148
Page 4A-35