SERVICE PROCEDURES REQUIRING MAJOR DISASSEMBLY
Speedometer Hose Replacement
1. Remove hose from plastic adaptor fitting.
2. Remove hex fitting from inner transom and pull speedometer hose through
3. Remove speedometer hose by removing clamp and pulling hose off.
4. Install inner new speedometer hose on barbed fitting. Secure with hose clamp.
5. Push speedometer hose through transom.
Page 4B-34
a -
Hose
b -
Plastic Adaptor Fitting
transom.
a -
Hex Fitting
b
a
SERVICE MANUAL NUMBER 28
a
90-863160 MAY 2000
22461
76672