Gear Housing Disassembly (Bravo Three) - Mercury BRAVO Service Manual

SERVICE MANUAL NUMBER 28
Gear Housing Disassembly
1. Remove, empty and clean gear lube monitor.
2. Remove vent plug.
3. Drain drive unit at fill/drain screw.
90-863160 MAY 2000
b. Outer Shaft - Position unit with shafts positioned down. Position dial indicator on out-
er propeller shaft. Rotate outer propeller shaft while observing dial indicator. If de-
flection is more than .010 in. (0.254 mm), a bent outer propeller shaft is indicated.
a - Dial Indicator
b - Outer Propeller Shaft
a - Vent Plug
a - Fill/Drain Screw
a
a
BRAVO THREE GEAR HOUSING
b
a
75901
72522
Page 3D-9