Propeller Shaft Spline Lash Check (Bravo Three) - Mercury BRAVO Service Manual

SERVICE MANUAL NUMBER 28
4. Remove snap ring, and driven gear and bearing assembly from outer propeller shaft.
Propeller Shaft Spline Lash Check
1. Check inner propeller shaft spline lash as follows:
90-863160 MAY 2000
a - Snap Ring
b - Driven Gear and Bearing Assembly
c - Outer Propeller Shaft
a. Place inner propeller shaft on two V-blocks.
a - Inner Propeller Shaft
b - V-Blocks
b. Install indicator rod on inner propeller shaft just behind shaft spline.
a - Indicator Rod
b - Inner Propeller Shaft
c. Slide front driven gear assembly on spline of inner propeller shaft.
a
b
b
BRAVO THREE GEAR HOUSING
a
b
c
a
72213
72229
72230
Page 3D-21