Mercury BRAVO Service Manual page 354

SERVICE PROCEDURES REQUIRING MAJOR DISASSEMBLY
11. Remove speedometer tubing clip from bell housing.
12. On Standard Transom Assembly - Remove hinge pins from port and starboard sides.
13. On High Performance Transom Assembly - Remove hinge pins using special tool
Page 4B-12
a - Bell Housing
b - Speedometer Tubing Clip
a - Bell Housing
b - Hinge Pins
(91-63616) and slide hammer as follows:
a. Remove hinge pin screws.
a - Hinge Pin Screws
a
a
SERVICE MANUAL NUMBER 28
b
b
a
22121
22113
71825
90-863160 MAY 2000