Trim Cylinder Reassembly - Mercury BRAVO Service Manual

TRIM CYLINDERS
Reassembly
Ensure that work area and all components are clean before reassembling trim cylin-
ders. Power Trim components can become damaged if dirt gets into system.
1. Install small O-ring into end of piston rod.
2. Install small O-rings and continuity spring into end cap.
3. Install rod scraper, plain washer and retaining ring into end cap.
4. Install large O-ring onto outside diameter of end cap.
Page 5B-14
a - Small O-ring
b - End Of Piston Rod
CAUTION
b
a
SERVICE MANUAL NUMBER 28
22132
90-863160 MAY 2000