Mercury BRAVO Service Manual page 73

SERVICE MANUAL NUMBER 28
1. Ensure that the Trim-In Limit Insert is positioned as shown for the appropriate Bravo
IMPORTANT: The position of the Trim-In Limit Insert on the Bravo Three sterndrive
unit should only be changed after the boat has been properly tested. Contact the boat
manufacturer if you are not sure of the original position for a particular boat
application.
90-863160 MAY 2000
model.
Bravo One and Two (Positioned Forward)
Bravo Three (Positioned Aft)
a - Trim-In Limit Insert
REMOVAL, INSTALLATION AND ADJUSTMENTS
a
a
75157
75158
Page 2A-5