Trim Cylinder Internal Leak Test - Mercury BRAVO Service Manual

OILDYNE TRIM PUMP

Trim Cylinder Internal Leak Test

IMPORTANT: Before performing the following test, ensure that OUT/UP pressure
meets specifications designated in OUT/UP pressure test.
1. Reconnect the trim cylinder hoses if disconnected.
Page 5A-12
a. Remove the plugs and caps.
b. Install the OUT/UP hose to the forward hole on the hydraulic connector. Tighten se-
curely.
c. Install the IN/DOWN hose to the aft hole on the hydraulic connector. Tighten secure-
ly.
a - OUT/UP Hose
b - IN/DOWN Hose
c - Hydraulic Connector
c
b
SERVICE MANUAL NUMBER 28
a
90-863160 MAY 2000
50391