Solenoid Test (Pump In Boat) - Mercury BRAVO Service Manual

SERVICE MANUAL NUMBER 28

Solenoid Test (Pump In Boat)

DO NOT perform this test near flammables or explosives as a spark may occur when
making connections.
Remain clear of the sterndrive unit when performing power trim pump motor tests
with pump in the boat and hydraulic hoses connected.
UP/OUT SOLENOID
1. Connect a jumper wire between the positive (+) solenoid terminal and the blue-white
2. The motor should run.
90-863160 MAY 2000
harness wire terminal.
a
b
a - OUT/UP Solenoid
b - Positive (+) Solenoid Terminal
c - BLUE/WHITE Harness Wire Terminal
d - Jumper Wire
WARNING
CAUTION
c
OILDYNE TRIM PUMP
d
Page 5A-19
22495