SERVICE MANUAL NUMBER 28
Bearing Carrier Inspection
1. The condition of the propeller shaft tapered roller bearing cup is an indication of the
2. Check bearing carrier for signs of corrosion, especially on gear housing to bearing
Bearing Carrier Disassembly
1. Remove bearing cup using slide hammer puller.
2. Remove oil seals from bearing carrier using a hammer and punch.
90-863160 MAY 2000
condition of tapered roller bearing on propeller shaft. Replace bearing and cup if cup is
pitted, grooved, scored, worn, uneven, discolored from overheating or has embedded
metal particles.
carrier mating surfaces. If corrosion is evident, replace bearing carrier.
a -
Slide Hammer Puller
b -
Bearing Cup
a -
Oil Seals (2)
b -
Punch
a
b
b
a
BRAVO ONE GEAR HOUSING
22087
22111
Page 3B-23