Mercury BRAVO Service Manual page 370

SERVICE PROCEDURES REQUIRING MAJOR DISASSEMBLY
Bellows clamp may corrode if ground clip is not installed.
5. Position ground clip on bellows.
6. Position U-joint bellows with TOP mark facing upwards and install U-joint bellows on
IMPORTANT: Ensure that the bead on the inner mating surface of bellows is posi-
tioned in the groove in gimbal housing flange.
Page 4B-28
a - Grounding Clip
gimbal housing flange and position clamp as shown. Torque to 35 lb-in. (4 Nm).
a - U-joint Bellows
b - Hose Clamp
CAUTION
a
a
b
SERVICE MANUAL NUMBER 28
50383
50383
90-863160 MAY 2000