Drive Shaft Housing Reassembly - Mercury BRAVO Service Manual

SERVICE MANUAL NUMBER 28

Drive Shaft Housing Reassembly

90-863160 MAY 2000
• Two (2) numbers are stamped in the shifter cavity on the back of the drive shaft hous-
ing. The top number designates the thickness of the top thrust bearing race, and the
bottom number designates the thickness of the bottom thrust bearing race. One of
three numbers appears in each position (61, 64) e.g. 61 = .061 in. Use numbers that
are stamped in housing as a guide for obtaining replacement parts. Measure thrust
bearing races with a micrometer to be sure that their thickness correspond to the
numbers stamped in the drive shaft housing.
a
a - Stamped Number
a - Micrometer
b - Race
6 1
6
4
b
DRIVE SHAFT HOUSING
a
76849
22100
Page 3A-55