Mercury BRAVO Service Manual page 590

ACCESSORIES - ALL MODELS
24. Install a new O-ring onto the shaft end plug.
25. Lightly lubricate the O-ring with 2-4-C Marine Lubricant with Teflon and insert the plug
26. Align the cotter pin holes and secure the end plug to the shaft with a cotter pin. Spread
27. Liberally apply 2-4-C Marine Lubricant with Teflon to each side of the slide rails and
28. Install a paper gasket onto the end plate. Hold the gasket in place with 2-4-C Marine
Page 8A-12
into the shaft end. Be careful not to damage the O-ring. A damaged O-ring will cause
a vacuum leak.
both ends of the cotter pin.
a - O-ring
b - Shaft End Cap
c - Cotter Hole(s)
d - Cotter Pin Ends
wheel.
a - Slide Rails
b - Wheel
Lubricant with Teflon.
a
c
c
d
50423
b
a
SERVICE MANUAL NUMBER 28
b
90-863160 MAY 2000
50422
50424
50426