Bravo Two Models; Bravo Three Models - Mercury TDI 3.0L Owner's Operation And Maintenance Manual

4. Slide the propeller and the attaching hardware from the propeller shaft.
a
b

Bravo Two Models

1. Straighten the bent tabs of the tab washer on the propeller shaft.
b
a
2. Place a block of wood between the propeller blade and the sterndrive's anti‑ventilation plate.
3. Turn the propeller shaft nut counterclockwise to remove the nut.
4. Slide the propeller and attaching hardware from the propeller shaft.
a
b

Bravo Three Models

1. Place a block of wood between the propeller blade and the sterndrive's anti‑ventilation plate.
2. Remove the bolt and washers securing the propeller shaft anode.
90-8M0145546 MAY 2018
eng
d
c
c
a - Propeller
b - Tab washer
d
c - Drive sleeve adapter
d - Tab bent down
e
e - Propeller nut
4750
a -
b -
a
c -
b
c
4826
c
d
f
8566
e
Bravo One models
a - Propeller shaft splines
b - Forward thrust hub
c - Flo‑Torque II drive hub
d - Propeller
e
e - Drive sleeve adapter
f
f - Tab washer
g
g - Propeller nut
5301
Wood block
Propeller
Propeller nut under socket
Bravo Two
a - Propeller shaft splines
b - Forward thrust hub
c - Propeller
d - Spline washer
e - Tab washer
f - Propeller nut
Section 4 - Maintenance
Page 79