DRIVE SHAFT HOUSING
5. Place top gear and then thrust collar over shaft.
6. Press gear and thrust collar down so that groove in shaft is completely exposed. Install
7. Release pressure from gear. Thrust collar should come up to the point where top of
Page 3A-46
a -
Thrust Collar
b -
Top Gear
c -
Stand (91-17301A1)
keepers.
a -
Top Gear
b -
Keepers (2)
keepers are level with top of thrust collar at position shown.
a -
Keepers Level With Thrust Collar
a
b
c
a
b
a
SERVICE MANUAL NUMBER 28
76847
22105
22105
90-863160 MAY 2000