SERVICE PROCEDURES REQUIRING MAJOR DISASSEMBLY
Bell Housing Removal
1. Remove sterndrive unit. Refer to Section 2A.
2. Remove shift cable from bell housing by loosening anchor screws and disconnecting
3. Remove end guide.
4. Remove flanged nut. Hold shift cable retaining nut with wrench.
5. Turn tapered insert counterclockwise to remove from I.D. of water hose.
6. Remove water hose from bell housing.
Page 4B-10
shift cable end guide from shift bracket.
a -
End Guide
b -
Anchor Screws (2)
a -
Shift Cable Retaining Nut
b -
Seal Washer
c -
Flanged Nut
a -
Bell Housing
b -
Tapered Insert
c -
Tapered Insert Tool (91-43579)
d -
Water Hose
a
c
b
d
c
SERVICE MANUAL NUMBER 28
b
b
a
a
90-863160 MAY 2000
22183
76673
50322