Access Plug Kit Installation - Mercury BRAVO Service Manual

Hide thumbs Also See for BRAVO:

Table of Contents

SERVICE PROCEDURES REQUIRING MAJOR DISASSEMBLY

Access Plug Kit Installation

NOTE: If steering lever cavity is not accessible, it will be necessary to drill access holes in

gimbal housing. This procedure requires the following:

1. Use template at the end of this section as a guide for the correct location for cutting and

Be sure to drill and cut hole and tap threads perpendicular to gimbal housing sur-

faces in the following steps.

2. Drill pilot holes (port and starboard) using a 1/4 in.(6 mm) drill bit.

Access Plug Kit 22-88847A-1

1-1/8 in. Hole Saw (obtain locally)

1 in. NPT Pipe Tap (obtain locally)

drilling access holes. Align template with dimple located beneath decal on the gimbal

Dimple (Beneath decal)

SERVICE MANUAL NUMBER 28

90-863160 MAY 2000