Mercury BRAVO Service Manual page 262

BRAVO TWO GEAR HOUSING
31. Install gear housing to drive shaft housing. Torque fasteners to 35 lb-ft (47 Nm).
32. Reinstall drive unit. Refer to SECTION 2A - Removal, Installation and Adjustments.
33. Fill drive unit with Gear Lube. Refer to SECTION 1B - Maintenance.
Page 3C-42
a - Nuts And Washers (3 Each Side)
b - Bolt (1)
a
b
SERVICE MANUAL NUMBER 28
90-863160 MAY 2000