Driven Gear Bearing Inspection (Bravo Two); Driven Gear Bearing Removal (Bravo Two) - Mercury BRAVO Service Manual

SERVICE MANUAL NUMBER 28
Driven Gear Bearing
Inspection
1. Remove bearing from driven gear. Inspect both the driven gear and the pinion gear for
2. Replace tapered roller bearing and cup if cup is pitted, grooved, scoured, worn uneven,
Driven Gear Bearing Removal
1. Remove bearing from driven gear using universal puller plate. Inspect both the driven
90-863160 MAY 2000
pitting, chipped or broken teeth and excessive or uneven wear. Replace both gears if
any of these conditions exist.
discolored from overheating or has metal particles embedded in the cup.
gear and the pinion gear for pitting, chipped or broken teeth and excessive or uneven
wear. Replace both gears if any of these conditions exist.
a - Suitable Mandrel
b - Universal Puller Plate
c - Bearing
d - Driven Gear
a
c b
d
BRAVO TWO GEAR HOUSING
22108
Page 3C-25