SERVICE MANUAL NUMBER 28
Steel Bearing Adaptor Removal
IMPORTANT: It is not necessary to remove the steel bearing adaptor for normal drive-
shaft housing disassembly; however, in the event of gear or bearing failure the steel
bearing adaptor can be removed to aid in removal of metal chips and contamination
from oil passages.
1. Remove steel bearing adaptor using bearing adaptor socket. Heat area around steel
2. Remove oil passage plug.
3. Clean metal chips and contamination from oil passage.
90-863160 MAY 2000
bearing adaptor with a torch lamp to ease removal.
a -
Steel Bearing Adaptor
b -
Bearing Adaptor Socket (91-862531)
a -
Drive Shaft Housing
b -
Oil Passage Plug
DRIVE SHAFT HOUSING
b
a
b
a
Page 3A-51
77021
77043