SERVICE MANUAL NUMBER 28
TRIMMING STERNDRIVE UNIT OUT (BOW UP)
1. Press UP/OUT Button until sterndrive unit moves to properly trim boat or trim limit switch
NEVER trim the sterndrive unit OUT using the "Trailer" switch(es) while boat is un-
derway. Severe damage to sterndrive unit may result if the unit is raised beyond the
gimbal ring support flanges at engine speeds above idle RPM.
TRIMMING STERNDRIVE UNIT IN (BOW DOWN)
1. Press IN/DOWN Button until sterndrive unit moves to properly trim boat or until
90-863160 MAY 2000
stops outward travel.
a
a -
UP/OUT Button
sterndrive unit reaches end of downward travel.
a -
IN/DOWN Button
CAUTION
a
AUTO TRIM II
22174
70023
Page 5D-5