SERVICE MANUAL NUMBER 28
IMPORTANT: When replacing the brush that is connected to the field wires, cut the
brush wire as close to the brush as possible.
4. Cut the brush wire as close to the brush as possible and discard the brush.
5. Connect the new brush wire to the field wire cut in the previous step. Secure by crimping
90-863160 MAY 2000
a -
Brush Wire
b -
Brush
both wires together as shown.
a -
Brush Wire
b -
Field Wire (Old Brush Wire)
c -
Crimp Connector
b
a
a
c
b
OILDYNE TRIM PUMP
22632
22635
Page 5A-47