Mercury BRAVO Service Manual page 81

SERVICE MANUAL NUMBER 28
IMPORTANT: Hose must not come in contact with steering system components or the
engine coupler and drive shaft.
2.
3. Install water inlet fitting with gasket. Torque bolts and star washers to 45 lb-in. (5 Nm).
4. On Some Models: The gear lube hose may be routed toward the port side of the engine.
90-863160 MAY 2000
Connect gear lube monitor hose.
c
a
b
a - Hose To Gear Lube Monitor
b - Hose Clamp
c - Water Inlet Fitting
d - Bolts And Star Washers
Secure the hose at the top side of the water fitting using the hose clip as shown. Torque
bolts and star washers to 45 lb-in. (5 Nm).
c
a
a - Gear Lube Monitor Hose
b - Hose Clip
c - Water Hose Fitting
d - Bolts And Star Washers
REMOVAL, INSTALLATION AND ADJUSTMENTS
d
b
d
76640
76635
Page 2A-13