Mercury BRAVO Service Manual page 331

SERVICE MANUAL NUMBER 28
4. Install and compress shift cable bellows crimp clamp, maintaining a 1/2 in. diameter
5. Install core wire locating tool on face of bell housing.
6. Install threaded tube until it bottoms.
7. Tighten finger tight.
8. Tighten jam nut securely.
90-863160 MAY 2000
round O.D. Ensure that clamp is crimped evenly to maintain a good seal between
bellows and shift cable. Refer to "Crimp Clamp Tool." Do NOT allow bellows to flatten.
a - Crimp Clamp
a - Bell Housing
b - Core Wire Locating Tool (P/N 91-17263)
a - Threaded Tube
b - Jam Nut
SERVICE PROCEDURES REQUIRING MINOR DISASSEMBLY
a
b
a
b
a
50327
22117
22183
Page 4A-25