DRIVE SHAFT HOUSING
10. Install shift handle tool through shift linkage and into shifter shaft. Move shifter shaft back
11. Apply Loctite 271 to first 2-3 threads of shift linkage cap screw and install. Torque screw
Page 3A-62
and forth as necessary to align lower hole in shift cam assembly with threaded hole in
shifter shaft. Apply Loctite 271 to first 2 or 3 threads of screw, install shift cam cap screw
and torque to 100-120 lb-in. (12-13 Nm).
a -
Shift Handle Tool
b -
Shift Linkage
c -
Shift Cam Assembly
to 100-120 lb-in. (12-13 Nm).
a -
Cap Screw
c
b
a
a
SERVICE MANUAL NUMBER 28
76864
76854
90-863160 MAY 2000