Pinion Bearing Removal (Bravo Two) - Mercury BRAVO Service Manual

BRAVO TWO GEAR HOUSING
Pinion Bearing Removal
IMPORTANT: All needle bearings MUST BE in place inside bearing casing while driv-
ing pinion bearing from gear case or bearing casing will bend or break and become
difficult to remove.
1. Heat area around bearing remover to approximately 200° F (93.3_C) to ease removal.
Page 3C-16
Do not use open flame. Remove pinion bearing using bearing remover and driver rod.
Use bearing driver as a pilot.
a - Bearing Driver (91-813653)
b - Driver Rod (91-37323)
c - Bearing Remover (91-63638)
d - Area Around Pinion Bearing
SERVICE MANUAL NUMBER 28
b
a
c
d
90-863160 MAY 2000
75902