SERVICE MANUAL NUMBER 28
5. Remove the piston by removing the O-ring from the shaft (behind the piston, next to the
6. Remove the shaft end plug.
7. Remove the 2 bolts and copper sealing washers indicated below.
90-863160 MAY 2000
2nd snap ring) and then removing the snap ring.
b
c
a -
Shaft End Plug
b -
Piston
c -
O-ring (Behind Piston)
d -
Snap Ring
a -
2 Bolts and Copper Washers
d
a
a
ACCESSORIES - ALL MODELS
50423
50339
50339
Page 8A-7