Mercury BRAVO Service Manual page 100

REMOVAL, INSTALLATION AND ADJUSTMENTS
9. Shift remote control lever into full forward position. Rear slot in tool should fit over shift
RH ROTATION BRAVO ONE AND TWO, AND ALL BRAVO THREE MODELS: Rear slot
in tool should fit over shift lever stud.
LH ROTATION BRAVO ONE AND TWO MODELS: Forward slot in tool should fit over shift
lever stud.
If slot does not fit over stud, loosen shift lever stud and slide stud up or down, until slot in
tool fits over stud. When adjustment is correct, retighten stud.
10. Remove adjustment tool.
11. Lubricate shift cable pivot points with 30W oil.
Page 2A-32
lever stud.
RH Rotation Bravo One And Two, And All Bravo Three Models
d
LH Rotation Bravo One And Two Models
a - Adjustment Tool
b - Barrel Retainer
c - Shift Lever Stud
d - Shift Lever Adjustment Slot
d
a
c
c
a
SERVICE MANUAL NUMBER 28
b
b
90-863160 MAY 2000
23345
23345