Power Steering Pump Cleaning And Inspection; Power Steering Pump Reassembly - Mercury BRAVO Service Manual

POWER STEERING
12. Remove magnet.
Cleaning And Inspection
1. Clean and inspect all metal parts.
Reassembly
NOTE: All references to Power Steering fluid refer to Quicksilver Power Trim and Steering
Fluid, or Dexron II if Quicksilver product is not available.
NOTE: Obtain and install a new seal kit 5688044 from a local GM automotive dealer when
reassembling pump.
1. Install new pump shaft oil seal metal side up. Support the pump reservoir so that the
2. Lubricate pressure plate O-ring with power steering fluid and place in the third groove
Page 6A-26
a - Magnet
back does not distort.
a - New Oil Seal
b - 1 in. Socket
c - Pump Reservoir
in the housing.
a
b
c
SERVICE MANUAL NUMBER 28
a
90-863160 MAY 2000
22154
22151