SERVICE MANUAL NUMBER 28
7. Install original thickness shim(s) for lower bearing cup into gear housing. If shims were
8. Install drive shaft lower bearing cup, using cup driver.
90-863160 MAY 2000
lost or ruined where original thickness cannot be determined, install a .050 in. (1.27 mm)
shim pack for a starting point.
a -
Shim(s)
a -
Bearing Cup
b -
Bearing Cup Driver (P/N 91-67443T)
c -
Old Propeller Shaft Or Driver Rod
c
b
a
BRAVO THREE GEAR HOUSING
a
72262
72263
Page 3D-31