SERVICE MANUAL NUMBER 28
2. Reinstall retainer. Torque screw to 95 lb-in. (11 Nm).
3. Install U-joint bellows on bell housing as follows:
90-863160 MAY 2000
a -
Clamp
b -
Screw
a. Position U-joint bellows on bell housing. Ensure that the bell housing flange rests
in the second groove from the end of the bellows.
a -
Bell Housing Flange
b. Lubricate sleeve outside diameter with soapy water or engine cleaner. Install sleeve
with sleeve installation tool and a suitable driving rod.
a -
Sleeve
b -
Sleeve Installation Tool (91-818162)
c -
Suitable Driving Rod
SERVICE PROCEDURES REQUIRING MINOR DISASSEMBLY
a
b
a
a
76670
70197
22116
b
c
76671
Page 4A-13