Gear Lube Monitor System Reassembly - Mercury BRAVO Service Manual

SERVICE MANUAL NUMBER 28
Reassembly
1. Driveshaft Housing - insert spring, check ball and seal cup. Press or tap carefully on
2. Bell Housing - coat O-rings with gear lube. Insert check valve assembly into
90-863160 MAY 2000
seal cup until outer face is flush with casting surface. Do not use sealant.
passageway. Place 3/8 in. deep wall socket over valve end and tap into casting until
shoulder surface "e" is flush with casting surface.
a - Seal Cup
b - Check Ball
c - Spring
d - Bell Housing Check Valve Assembly
e - Surface Flush with Casting
f - O-rings (2)
g - Valve End
SERVICE PROCEDURES REQUIRING MAJOR DISASSEMBLY
g
c f
e
d
b a
50321
Page 4B-37