Mercury BRAVO Service Manual page 399

SERVICE MANUAL NUMBER 28
Crimp Clamp Tool
1. Weld a 3/4 in. nut to the jaws of a pair of pliers (as shown).
2. Saw the nut in half without damaging the pliers.
3. Clamp the jaws of the pliers in a vice so that the two halves of the nut are pressed firmly
4. Use a 1/2 in. drill bit to drill the threads out of the nut.
5. Remove the pliers from the clamp and bevel the edges of the nut as indicated.
90-863160 MAY 2000
b
a
b
a - Bevel Edges
b - 3/4 in. Nut
c - Pliers
together.
SERVICE PROCEDURES REQUIRING MAJOR DISASSEMBLY
a
a
c
74148
Page 4B-57