SERVICE MANUAL NUMBER 28
3. Connect the test gauge at the most convenient location at pump or hydraulic connector.
4. Open valve "A" and "B" and run the pump OUT/UP and IN/DOWN several times (to
Internal Restriction Test
1. Open valves "A" and "B".
2. Run pump OUT/UP and IN/DOWN while observing gauge.
3. Replace adapter if pressure exceeds 200 psi (1379 kPa).
90-863160 MAY 2000
Gauge Connected to Pump
a -
Hydraulic Test Gauge (91-52915A6)
A
B
b
Gauge Connected to Hydraulic Connector
a -
Hydraulic Test Gauge (91-52915A6)
b -
Gimbal Housing Hydraulic Connector
c -
Caps (Supplied with Gauge)
d -
Plugs (Supplied with Gauge)
purge air).
a
B
A
a
50390
OILDYNE TRIM PUMP
70596
d
c
50391
Page 5A-7