SERVICE PROCEDURES REQUIRING MAJOR DISASSEMBLY
Exhaust Bellows Replacement
NOTE: (For Exhaust Tube Replacement, see Section 4A)
1. Remove exhaust bellows from gimbal housing.
2. If old exhaust bellows will be reinstalled, remove old adhesive from exhaust bellows
3. Clean exhaust bellows mounting flange with sandpaper and wipe clean with lacquer
Page 4B-32
a -
Exhaust Bellows
b -
Hose Clamp
mounting surfaces with lacquer thinner.
a -
Mounting Surface
thinner.
a
a -
Mounting Flange
b
a
SERVICE MANUAL NUMBER 28
a
90-863160 MAY 2000
76660
22450
76662