Mercury BRAVO Service Manual page 353

SERVICE MANUAL NUMBER 28
7. Remove gear lube monitor 90° quick disconnect fitting and through bulkhead fitting
8. Spray engine cleaner around edge of bellows sleeve and remove with U-joint bellows
9. Loosen hose clamps.
10. Remove exhaust bellows from bell housing.
90-863160 MAY 2000
E-clip so that fitting will pull out of gimbal housing upon removal of bell housing.
c
b
a
76665
a - Quick Disconnect Fitting
b - E-Clip
c - Through Bulkhead Fitting
sleeve removal tool.
a - Bell Housing
b - U-Bellows Sleeve Removal Tool (91-862546)
a - Exhaust Bellows
b - Hose Clamps
SERVICE PROCEDURES REQUIRING MAJOR DISASSEMBLY
b
a
b
76640
a
71526
22116
Page 4B-11