Mercury BRAVO Service Manual page 91

SERVICE MANUAL NUMBER 28
IMPORTANT: The edge of the U-joint bellows acts as a seal between the bell housing
and the drive shaft housing. Ensure that the surface is not damaged.
5. Inspect the U-joint bellows for cracks, nicks, and cleanliness. Replace or clean the
6. Lubricate the O-ring seals on the face of the drive shaft housing.
90-863160 MAY 2000
a
a - Drive Shaft Bellows Edge
bellows as necessary.
a - O-Ring Seals
REMOVAL, INSTALLATION AND ADJUSTMENTS
a
24725
22031
Page 2A-23