Mercury BRAVO Service Manual page 364

SERVICE PROCEDURES REQUIRING MAJOR DISASSEMBLY
2. Install gimbal ring lower swivel pin bushing as follows:
Page 4B-22
b. Apply Resiweld Sealer to outer diameter of hinge pin bushing and position bushing
on bearing and seal driver.
a - Hinge Pin Bushing
b - Bearing And Seal Driver (92-65150-1)
c. Inspect bore for cleanliness and damage before installing bushing.
d. Install bushing in each side of gimbal ring by pressing in place.
a - Gimbal Ring
a. Apply Resiweld Sealer to outer diameter of bushing and position bushing on bearing
and seal driver.
a - Outer Diameter Of Bushing
b - Bearing And Seal Driver (92-65150-1)
b. Inspect bore for cleanliness and damage before installing bushing.
a
a
b
SERVICE MANUAL NUMBER 28
b
a
90-863160 MAY 2000
22440
22454
22440